Production Presses
SERVO Hydraulic Production Presses

SERVO Hydraulic Production Presses

Accelerate your productivity with the STENHOJ SERVO-Hydraulic Press.

The STENHOJ SERVO-Hydraulic Production Press is our proud answer to modern, sustainable and cost-efficient production, offering an impressive 70% in energy savings compared to a conventional hydraulic press.

Characterised by its rapid speed, great power, remarkably low noise levels and advanced sensors for data intelligence, this is the production press of the future.

Catalogue Send request

Product
Features
catalogue
Guiding Systems
Catalogue

Need Help?

Unique Features

Energy efficient - (-70%)
High pressure consistency
Rapid speed - 500 mm/s
Single and double acting die cushion
Low noise level - <68dB(A)
Full force on total stroke length
Fully programmable PLC
High accuracy on ram stroke
Low maintenance costs
High repeatability
100% convertible with standard tooling

Areas of Application

Hot Pressing
Cold Pressing
Deep Drawing
Bending
Compressing
Embossing
Forging
Forming
Grinding
Stamping
Punching
Assembly
Molding
Straightening
Moulding

Specifications

Technology

Powerful, short cycles times, high precision, low energy consumption and low noise - the STENHOJ SERVO-hydraulic press redefines the standards of industrial presses.

Traditionally, mechanical and hydraulic presses have each brought unique benefits to industrial production. While the mechanical press is characterised by high stroke speed, high repeatability, simple set up and less maintenance, the hydraulic press stands out on its great power, flexibility and major control on energy and movements of the single components.

Conventional Hydraulic System Servo Hydraulic System

Design
By combining the quality of our conventional hydraulic production press and replacing the control valves of the hydraulic systems with a servo motor, speed, position and press force are controlled merely electrically. The simple design reduces the number of parts and stabilises oil temperature while facilitating availability and repeat accuracy. Finally the simple design minimises maintenance costs and frequency.

Speed
Integrating the force of speed with a servo-motor solution enables extremely fast acceleration and deceleration measured up to 3 times faster than a conventional hydraulic press. The high speed facilitates not only significantly shorter cycle times, yet also improves process control and overall performance stability.

Energy savings up to 70%
Facilitating high speed and extremely short cycle times, the servo-motor solution distinguishes itself by reducing energy consumption with up to 70%, depending on the application.

High energy savings are achieved primarily by:

Regenerates fall-energy from ram approach
Main motor stop for every completed stroke (no idling)
No energy loss by deep drawing with passive cushion (single acting die cushion)
Reduced cooling of the hydraulics

Comparative Model - Hydraulic vs Servo vs Mechanical

Well Tested Technology
While the SERVO-hydraulic press is a new product to STENHOJ, the high-quality components and combined technologies deployed, are familiar and well tested.

Thus, underpinning the new SERVO-hydraulic press technology, we use the same quality parts, components and electrical cabinets as for our well known hydraulic presses, while the construction of the hydraulic system still offers the same options for pressure control as our conventional hydraulic press.

Finally, we have deployed decades of experience with advanced pump systems and expertise from more than 150 advanced electro-mechanical broaching machines with equivalent servo-motor system to the design of the press.

By combining the best of two worlds the SERVO-hydraulic press from STENHOJ is a strong and competitive choice for modern production.

Speed

A significant feature of the SERVO-Hydraulic Press is its impressive speed.
By using a servo motor as driving force, acceleration and deceleration speed increases significantly compared to a conventional hydraulic press. The high speed of the press and fully programmable die cushion (speed, force and position), enables extremely short cycle times.

Pressing Speeds (typical)
Approach speed: 0-500 mm/s, adjustable in program and controlled by servo motor
Return speed: 0-500 mm/s, adjustable in program and controlled by servo motor
Pressing speed: 0-50 mm/s, adjustable in program and controlled by servo motor .

Efficient operation conditions:

More than 30 strokes/min.
0-100% return speed in 0.1 s (conventional +0.5 s)
Rapid Speed >500 mm/s – approach and return
Rapid acceleration and de-acceleration of ram
Full press force over the entire stroke
Single- and double acting die cushion
High position accuracy on ram
Fully programable ram and die cushion
Adjustable approach and return speed ->

Energy optimization
Trimming of cycle time
Factory acceptance

Control System

The user friendly control system is built to meet latest European safety regulations.
In accordance with the safety regulations, the hydraulic system has dual monitored safety valves, monitored by a safety PLC.

The various press functions of the press are set directly on the control cabinet and displayed on the HMI touch panel.

Operator Panel 1, 2, 3 axes or more
Based on a Siemens PLC and a 9-, 12- or 15-inch Siemens touch panel.
The control consists of a freely programmable interface with up to 54 program lines to build a press program.
The user can use the program lines to control the axes of the press and 8 I/O's, dependent or independent of each other in a desired sequence.

The following features can be selected in each program line directly on the operator panel:

Signal exchange between individual axes and I/O
Position control, speed control and pressure setting.
Progressive or degressive pressure or speed regulation within a given press process.
Dwell time in bottom ram position (timer function)
Decompression time at ram return start (timer function)
Stroke- and working hour counter
Memory for 1 up to 500 programs.
Error message from the PLC

Operation modes, on lockable electric selector switch

Inching (tool setting)
Two-hand operation
Single & double break light guards
Foot operation (optional)
Automatic operation

Light Guard
Using a light guard during insertion work allows safe operation without having to activate the normal operating push buttons. This works in a single or double break operation. Additional protection function against unauthorised access.

Integration Options
Possibility of signal exchange with external equipment, such as feeder, robot or transfer system.

Industry 4.0
The STENHOJ SERVO-hydraulic press not only meets energy goals of contemporary sustainable production. It also secures product quality and increased productivity with the integration of advanced sensors and actuator intelligence for data collection enabling OEE optimisation and predictive maintenance.

On request, wear, tool or service life monitoring can be integrated.

Servo Hydraulic Power Pack

Bed/table and Ram/slide

The well dimensioned Bed- and Ram plate is equipped with T-slots for clamping and support of the press tool.
We offer customised Bed plates and Ram plates dimensions with desired holes and T-slots

Ram plate guiding specifications
In addition to the high guiding accuracy of the cylinder and depending on the working task requirements, STENHØJ Hydraulik offers five guiding types for the Ram suitable for the pressing process.

Type 1 and 2: The Ram plate is guided by 2 or 4 columns through guides with self-lubricating bronze bushings from above. In order to ensure a stabilised construction, the columns are integrated into the Ram/slide plate.

Type 3 and 4: The Ram guide consists of four strong columns integrated in the frame leading the ram/slide plate trough self-lubricated guides. The choice between a ram plate or a ram in a welded box depends on the tool width and the tool support requirements.

Type 5: The Ram/slide is a Box design and guided by means of eight (8) pieces 90° guide shoes equipped with replaceable PTFE compound inserts for minimum friction and long life. These gibs allow for extraordinarily high loads. Replaceable, hardened, and grinded guideways are bolted onto the press frame.

Type 3-5 are commonly used when high accuracy and high guiding stability for long strokes and eccentric side load are required.

Cylinders

Ram/Slide Lock

Safety

Servo-Press Guiding Systems

Ram Box with 8 Guided Gibs (PPK)

The ram plate is:

designed in a welded box construction
equipped with T-slots for tool clamping
machined according to DIN 650
guided by means of eight (8) pieces 90° adjustable guide shoes
equipped with replaceable Teflon compound inserts
Replaceable, hardened, and grinded guideways bolted onto the press frame.

Allowable off-centre load of 10% of max. press force

4 Integrated Column Guided Ram Box (PPSP)

The ram plate is:

designed in a welded box construction
equipped with T-slots for tool clamping
machined according to DIN 650
Through-guided by 4 ram columns and bushings, equipped with Teflon-based compounds

Allowable off-centre load of 7,5% of max. press force

4 Integrated Column Guided Ram Box (PPSP)

4 Integrated Column Guided Ram Plate (PPS)

The ram plate is:

designed in a strong solid steel block
equipped with T-slots for tool clamping
machined according to DIN 650
guided with 4 through-going columns and bushings equipped with Teflon-based compounds

Allowable off-centre load of 5% of max. press force.

4 Integrated Column Guided Ram Plate (PPS)

4 Column Guided Ram Plate (PP4)

The ram plate is:

designed in a strong solid steel block
equipped with T-slots for tool clamping
machined according to DIN 650
guided by 4 hard chromed steel columns, and 4 bronze bushings

Allowable off-centre load of 3% of max. press force

2 Column Guided Ram Plate (PP2)

The ram plate is:

• designed in a strong solid steel block
• equipped with T-slots for tool clamping
• machined according to DIN 650.
• guided by 2 pcs. hard chromed steel columns and 2 pcs. bronze bushings.

Get in Touch

First name *

Last name

Company

E-mail *

Message

Klaus Holgersen

Technical Sales Manager