STANDARD PROGRAM - Workshop Presses, H-Type, 25T-100T

Our standard program is designed and manufactured in Denmark with high quality European components and low energy IE3 motors. The frame is conservatively designed and fully welded for extra high rigidity and tolerance. The presses are CE marked according to European standards.

SPECIFICATIONS

NOSE CAP

Model	WP-H/C 20	WP-H/C 25	WP-H/C 40	WP-H/C 60	WP-H/C 100
Diameter [mm]	ø60	ø60	ø65	ø85	ø100

QUESTIONS?
Having troubles figuring out which size fits your need? Have a look at the table below or contact our specialist team with questions or queries. 

MODEL			WP-H 25	WP-H 40	WP-H 60	WP-H 100	WP-H 200
Pressing force, max.		[kN]	250	400	600	1000	2000
Stroke		[mm]	400	400	400	400	400
Daylight, min.	A	[mm]	300	300	300	300	300
Daylight, max.	B	[mm]	900	900	900	900	900
Table width between verticals	C	[mm]	740	850	1010	1080	1150
Total Width	D	[mm]	1215	1320	1560	1730	1920
Side clearance	E	[mm]	160	245	290	360	460
Max floor space	F	[mm]	670	650	760	800	1040
Overall height	G	[mm]	2050	2150	2275	2500	2500
Bed height, max.	H	[mm]	1010	1045	1145	1245	1245
Press bed adjustment	I	[mm]	4x150	4x150	4x150	4x150	4x150
Moveable cylinder	J	[mm]	250*	275*	330*	340*	280*
Weight (Approx)		[kg]	300	500	800	1300	2100
MOTOR PUMP UNIT
Pressing speed		[mm/s]	10/10	9/9	10/5	8/3	10/2,5
Return speed		[mm/s]	16	12	14	11	14
Return load, max.		[kN]	30	30	30	30	200
Motor power 3x400V, 50Hz		[kW]	4	4	4	4	5,5
Oil reserve capacity		[L]	25	25	25	25	80

STANDARD PROGRAM - Workshop Presses, H-Type, 25T-100T

Our standard program is designed and manufactured in Denmark with high quality European components and low energy IE3 motors. The frame is conservatively designed and fully welded for extra high rigidity and tolerance. The presses are CE marked according to European standards.

SPECIFICATIONS

NOSE CAP

Model	WP-H/C 20	WP-H/C 25	WP-H/C 40	WP-H/C 60	WP-H/C 100
Diameter [mm]	ø60	ø60	ø65	ø85	ø100

QUESTIONS?
Having troubles figuring out which size fits your need? Have a look at the table below or contact our specialist team with questions or queries. 

MODEL			WP-H 25	WP-H 40	WP-H 60	WP-H 100	WP-H 200
Pressing force, max.		[kN]	250	400	600	1000	2000
Stroke		[mm]	400	400	400	400	400
Daylight, min.	A	[mm]	300	300	300	300	300
Daylight, max.	B	[mm]	900	900	900	900	900
Table width between verticals	C	[mm]	740	850	1010	1080	1150
Total Width	D	[mm]	1215	1320	1560	1730	1920
Side clearance	E	[mm]	160	245	290	360	460
Max floor space	F	[mm]	670	650	760	800	1040
Overall height	G	[mm]	2050	2150	2275	2500	2500
Bed height, max.	H	[mm]	1010	1045	1145	1245	1245
Press bed adjustment	I	[mm]	4x150	4x150	4x150	4x150	4x150
Moveable cylinder	J	[mm]	250*	275*	330*	340*	280*
Weight (Approx)		[kg]	300	500	800	1300	2100
MOTOR PUMP UNIT
Pressing speed		[mm/s]	10/10	9/9	10/5	8/3	10/2,5
Return speed		[mm/s]	16	12	14	11	14
Return load, max.		[kN]	30	30	30	30	200
Motor power 3x400V, 50Hz		[kW]	4	4	4	4	5,5
Oil reserve capacity		[L]	25	25	25	25	80

STANDARD PROGRAM - Workshop Presses, H-Type, 25T-100T

Our standard program is designed and manufactured in Denmark with high quality European components and low energy IE3 motors. The frame is conservatively designed and fully welded for extra high rigidity and tolerance. The presses are CE marked according to European standards.

SPECIFICATIONS

NOSE CAP

Model	WP-H/C 20	WP-H/C 25	WP-H/C 40	WP-H/C 60	WP-H/C 100
Diameter [mm]	ø60	ø60	ø65	ø85	ø100

QUESTIONS?
Having troubles figuring out which size fits your need? Have a look at the table below or contact our specialist team with questions or queries. 

MODEL			WP-H 25	WP-H 40	WP-H 60	WP-H 100	WP-H 200
Pressing force, max.		[kN]	250	400	600	1000	2000
Stroke		[mm]	400	400	400	400	400
Daylight, min.	A	[mm]	300	300	300	300	300
Daylight, max.	B	[mm]	900	900	900	900	900
Table width between verticals	C	[mm]	740	850	1010	1080	1150
Total Width	D	[mm]	1215	1320	1560	1730	1920
Side clearance	E	[mm]	160	245	290	360	460
Max floor space	F	[mm]	670	650	760	800	1040
Overall height	G	[mm]	2050	2150	2275	2500	2500
Bed height, max.	H	[mm]	1010	1045	1145	1245	1245
Press bed adjustment	I	[mm]	4x150	4x150	4x150	4x150	4x150
Moveable cylinder	J	[mm]	250*	275*	330*	340*	280*
Weight (Approx)		[kg]	300	500	800	1300	2100
MOTOR PUMP UNIT
Pressing speed		[mm/s]	10/10	9/9	10/5	8/3	10/2,5
Return speed		[mm/s]	16	12	14	11	14
Return load, max.		[kN]	30	30	30	30	200
Motor power 3x400V, 50Hz		[kW]	4	4	4	4	5,5
Oil reserve capacity		[L]	25	25	25	25	80

STANDARD PROGRAM - Workshop Presses, H-Type, 25T-100T

Our standard program is designed and manufactured in Denmark with high quality European components and low energy IE3 motors. The frame is conservatively designed and fully welded for extra high rigidity and tolerance. The presses are CE marked according to European standards.

SPECIFICATIONS

NOSE CAP

Model	WP-H/C 20	WP-H/C 25	WP-H/C 40	WP-H/C 60	WP-H/C 100
Diameter [mm]	ø60	ø60	ø65	ø85	ø100

QUESTIONS?
Having troubles figuring out which size fits your need? Have a look at the table below or contact our specialist team with questions or queries. 

MODEL			WP-H 25	WP-H 40	WP-H 60	WP-H 100	WP-H 200
Pressing force, max.		[kN]	250	400	600	1000	2000
Stroke		[mm]	400	400	400	400	400
Daylight, min.	A	[mm]	300	300	300	300	300
Daylight, max.	B	[mm]	900	900	900	900	900
Table width between verticals	C	[mm]	740	850	1010	1080	1150
Total Width	D	[mm]	1215	1320	1560	1730	1920
Side clearance	E	[mm]	160	245	290	360	460
Max floor space	F	[mm]	670	650	760	800	1040
Overall height	G	[mm]	2050	2150	2275	2500	2500
Bed height, max.	H	[mm]	1010	1045	1145	1245	1245
Press bed adjustment	I	[mm]	4x150	4x150	4x150	4x150	4x150
Moveable cylinder	J	[mm]	250*	275*	330*	340*	280*
Weight (Approx)		[kg]	300	500	800	1300	2100
MOTOR PUMP UNIT
Pressing speed		[mm/s]	10/10	9/9	10/5	8/3	10/2,5
Return speed		[mm/s]	16	12	14	11	14
Return load, max.		[kN]	30	30	30	30	200
Motor power 3x400V, 50Hz		[kW]	4	4	4	4	5,5
Oil reserve capacity		[L]	25	25	25	25	80

STANDARD PROGRAM, Workshop Presses, H-Type, 200T

Our standard program is designed and manufactured in Denmark with high quality European components and low energy IE3 motors. The frame is conservatively designed and fully welded for extra high rigidity and tolerance. The presses are CE marked according to European standards.

SPECIFICATIONS

NOSE CAP

Model	WP-H/C 20	WP-H/C 25	WP-H/C 40	WP-H/C 60	WP-H/C 100
Diameter [mm]	ø60	ø60	ø65	ø85	ø100

QUESTIONS?
Having troubles figuring out which size fits your need? Have a look at the table below or contact our specialist team with questions or queries. 

MODEL			WP-H 25	WP-H 40	WP-H 60	WP-H 100	WP-H 200
Pressing force, max.		[kN]	250	400	600	1000	2000
Stroke		[mm]	400	400	400	400	400
Daylight, min.	A	[mm]	300	300	300	300	300
Daylight, max.	B	[mm]	900	900	900	900	900
Table width between verticals	C	[mm]	740	850	1010	1080	1150
Total Width	D	[mm]	1215	1320	1560	1730	1920
Side clearance	E	[mm]	160	245	290	360	460
Max floor space	F	[mm]	670	650	760	800	1040
Overall height	G	[mm]	2050	2150	2275	2500	2500
Bed height, max.	H	[mm]	1010	1045	1145	1245	1245
Press bed adjustment	I	[mm]	4x150	4x150	4x150	4x150	4x150
Moveable cylinder	J	[mm]	250*	275*	330*	340*	280*
Weight (Approx)		[kg]	300	500	800	1300	2100
MOTOR PUMP UNIT
Pressing speed		[mm/s]	10/10	9/9	10/5	8/3	10/2,5
Return speed		[mm/s]	16	12	14	11	14
Return load, max.		[kN]	30	30	30	30	200
Motor power 3x400V, 50Hz		[kW]	4	4	4	4	5,5
Oil reserve capacity		[L]	25	25	25	25	80

• Joystick control with stepless pressing speed 0-100%
• Stepless adjustable pressing force 5-100%

Electrical control with Siemens 7’’ touch panel

• Adjustable top position
• Reversal functions
• Adjustable position control or adjustable press force
• Auto return of piston to top position with timer function
• Stroke Counter
• Including press flange and rotation protection of piston
• 3 position safety foot operation with 2m hand free operation

Ideal for mounting and small production work.

Electrical control with Siemens 7’’ touch panel

• Adjustable top position
• Reversal functions
• Adjustable position control or adjustable press force
• Auto return of piston to top position with timer function
• Stroke Counter
• Including press flange and rotation protection of piston
• Including 2 hand operation used to protect the operator’s hands. 

Ideal for mounting and small production work

This option allows you to select automatic sequence execution, allowing the operator to prepare the next item while the sequence executes.

For full security this solution includes fixed shielding on the sides and in the back. The front is supplied with sliding drawers with a safety switch that ensure that the doors are closed before the sequence is started.

The control is supplied with a key switch, where you can choose between manual and automatic sequence execution. In manual mode, the machine can be operated with the front doors open.

Front doors and side cover are supplied with 4 mm transparent polycarbonate plate.

This option allows you to select automatic sequence execution, allowing the operator to prepare the next item while the sequence executes.

• Fixed guarding at the sides and rear
• Sliding doors with a safety switch
• Key switch for manual or automatic sequence operation

Front doors and side cover are supplied with 4 mm transparent polycarbonate plate.

This option allows you to select automatic sequence execution, allowing the operator to prepare the next item while the sequence executes.

• Fixed guarding at the sides and rear
• The press or sequence stops when the light guard is interrupted
• Key switch for manual or automatic sequence operation

Side cover are supplied with 4 mm transparent polycarbonate plate.

Machined solid S355 quality steel that can withstand heavy loads, with T-groove for mounting tools.

Solid S355 quality steel, machined surfaces for great parallelism and fall protection, V-shaped back for pressing round items.

The ram plate allows for larger tool mounting.

Changes the stroke length to 800mm.

Minimizes the pressure loss when holding a constant pressure for an extended period.

Set of 8 arbors in diameter ø12-14-16-18-20-22-25-30mm incl. suspension and adapter.

Used for pressing bearings and bushings on and off.

Teardrop shaped retaining plate, used for pin press support in combination with arbor set.

For easy handling of broach when making keyways on pulleys, clutches and other items.

Suitable for H-Frame presses from 40-200t. Maximum tool width: 835 mm.

The lower tool has 4 pcs. 85 deg. dies, 16, 22, 35 og 50 mm.

Can be used for sheet thicknesses from 0,5 til 6 mm. Maximum presse force: 45 ton.

Suitable for H-Frame presses from 25-100T.

Bending tool for pipes/tubes with 6 different sizes of matrixes: 3/8", 1/2", 3/4", 1”, 1 1/4", 1 1/2". Includes 2 support blocks to fixate the tube.

Maximum allowed pressing force: 8T.

STENHOJ high quality hydraulic oil. 25-100t WP -> 1 can. 200 Ton presses -> 4 cans.

Order STENHOJ hydraulic oil together with your standard workshop press and receive one year extended warranty (3 years) *

* wear and tear parts excluded